Filter
Top Products
4.11 Wireless LAN module 4 Replacement Procedures
PORTEGE A100 Maintenance Manual (960-460) 4-25
4.11 Wireless LAN module
Removing the wireless LAN module
To remove the wireless LAN module, perform the following procedure. (See Figure 4-16.)
1. Peel off the glass tape on the wireless LAN antenna cables.
2. Remove the white and black antenna cables from the wireless LAN module.
3. Open the latches fixing the wireless LAN module and remove the wireless LAN
module.
Wireless LAN module
Latches
Antenna cables
Figure 4-16 Removing the wireless LAN module
Installing a wireless LAN module
To install a wireless LAN module, perform the following procedure. (See Figure 4-16.)
1. Insert a wireless LAN module into the connector of the computer slantwise and press
it to connect firmly.
2. Push down the wireless LAN module until it is latched firmly.
3. Connect the white and black antenna cables and fix them with glass tape.