Filter
Top Products
4.8 Palm rest/Touch pad 4 Replacement Procedures
PORTEGE A100 Maintenance Manual (960-460) 4-17
4.8 Palm rest/Touch pad
4.8.1 Palm rest
Removing the palm rest
The following describes the procedure for removing the palm rest. (See Figure 4-10, 4-11.)
Caution: The touch pad is stuck to the palm rest with adhesives, so it can not be
removed. When a touch pad is broken, replace a palm rest with a touch pad.
1. Turn over the computer and remove the following screw fixing the palm rest.
• M2×4Z BIND screw x1
M2
×
4Z BIND
Figure 4-10 Removing the screw
2. Turn over the computer and remove the cable from the connector PJ3201 on the
system board.