Filter
Top Products
3 Test and Diagnostics 3.24 Floppy Disk Drive Utilities
3-60 PORTEGE A100 Maintenance Manual (960-460)
4. DUMP program
(a) When DUMP program is loaded, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : V7.00
Drive type select (1:FDD, 2:HDD) ?
(b) Select a format type number. If 2:HDD is selected, the display will go to step (h).
If 1:FDD is selected, the following message appears:
Select drive number (1:A, 2:B) ?
(c) Select a drive number and the following message will be displayed.
Format type select (1:2DD, 2:2HD) ?
(d) Select a format type and the following message will appear:
2HD media mode (1:1.20MB,2:1.44MB,3:1.23MB) ?
(e) Select a media mode and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(f) Insert a source disk and press any key and the following message will appear:
—— Max. address ——
[Track ] = XXXX
[ Head ] = XX
[Sector] = XX
Track number ????
(g) Select the track number, the head number and the sector number you want to
dump. The system will access the disk and dump a list. Then the message shown in
(k) will appear.
(h) The following message will appear.
Select drive number (1:C, 2:D) ?
(i) Select a drive number and the following message will be displayed.
—— Max. address ——
[LBA ] = XXXXXXXXX
LBA number ??