Filter
Top Products
3.26 SETUP 3 Test and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-77
(g) Power Button Lamp
This option specifies a lamp pattern of power button.
Table 3-7 Lamp pattern of power button
Status Power ON Standby Power off/halt
Mode
1(default)
Lights blue. Lights yellow. Lights orange.
Mode 2 Lights blue. Lights green and
orange
alternately.
Lights green and blue
alternately.
Mode 3 Blinks in order of
green, orange and
blue
Lights yellow. Lights orange.
Off Does not light.
When the AC adapter and battery pack are removed, once the setting returns to
Mode1 (default). After turning on the power of the computer again, the setting
returns to the one before the AC adapter and battery pack are removed.
(h) Panel Power On/Off
This option is displayed in the resume mode.
Enabled Enables the Panel Power On/Off.
Disabled Disables the Panel Power On/Off. (Default)
8. Configuration
This option lets you set the device configuration.
Setup by OS Operating system sets devices that it can control. (Default)
All Devices BIOS sets all devices.
Note: When using installed OS, selecting “Set by OS” is recommended. But, when setting
“PC CARD-Controller Mode” to other than “ Auto-Selected”, select “ All
Devices”.
9. DRIVES I/O
This option set the HDD, CD-ROM and PC card.
(a) Build-in HDD