Filter
Top Products
1033
debugging bgp update vpls
Syntax debugging bgp update vpls [ peer { ipv4-address | group-name } ] [ receive | send ] [
verbose ]
undo debugging bgp update vpls [ peer { ipv4-address | group-name } ] [ receive |
send ] [ verbose ]
View User view
Default Level 1: Monitor level
Parameters peer { ipv4-address | group-name }: Enables/disables BGP VPLS update message
debugging for the specified peer/peer group.
receive: Enables/disables the debugging for the received BGP packets.
send: Enables/disables the debugging for the sent BGP packets.
verbose: Displays detailed debugging information.
Description Use the debugging bgp update vpls command to enable debugging for BGP
VPLS Update messages.
Use the
undo debugging bgp update vpls command to disable debugging
for BGP VPLS Update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
Examples # In a VPLS environment, Device A and Device B have established a BGP peer
relationship. Enable debugging for BGP VPLS update messages.
<Sysname> debugging bgp update vpls
*0.84372 Sysname RM/7/RMDEBUG:
BGP.VPLS: Send UPDATE to 1.1.1.1 for following destinations :
Origin : IGP
AS Path : 200
Next Hop : 5.5.5.5
afi = 155(vpls) safi = 128(vpls)
Route Distinguisher:100:1
CE-ID:1
label offset:0
label base:20480
Table 232 Description on the fields of the debugging bgp update vpls command
Field Description
afi = 196(vpls) safi = 128(vpls) Address family is 196. Sub-address family is
128 (VPLS).