Filter
Top Products
356 CHAPTER 21: BASIC DLSW CONFIGURATION COMMANDS
View Ethernet interface view
Parameter mseconds: LLC2 local acknowledgment delay, in milliseconds. The effective range
is 1 to 60,000.
Description Use the
llc2 timer ack-delay command to configure the LLC2 local
acknowledgment delay time, namely the maximum length of time the device
waits before sending an acknowledgment to the peer end upon receiving an LLC2
frame.
Use the
undo llc2 timer ack-delay command to restore the default setting.
By default, the LLC2 local acknowledgment delay time is 100 milliseconds.
Example # Set the LLC2 local acknowledgment delay time to 200 milliseconds on Ethernet
1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer ack-delay 200
llc2 timer busy
Syntax llc2 timer busy mseconds
undo llc2 timer busy
View Ethernet interface view
Parameter mseconds: LLC2 busy-station polling interval, in milliseconds. The effective range is
1 to 60,000. The system default is 300 milliseconds.
Description Use the
llc2 timer busy command to configure the LLC2 busy-station polling
interval, namely the amount of time the router waits before repelling a busy
station.
Use the
undo llc2 timer busy command to restore the default setting.
Example # Set the LLC2 busy-station polling interval to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer busy 200
llc2 timer detect
Syntax llc2 timer detect mseconds
undo llc2 timer detect