Filter
Top Products
783
display ip interface brief
Syntax display ip interface brief [ interface-type [ interface-number ]]
View Any view
Parameter interface-type: Interface type.
interface-number: Interface number.
Description Use the
display ip interface brief command to display brief information about
a specified or all Layer 3 interfaces.
Without the interface type and interface number specified, information about all
layer 3 interfaces is displayed; with only the interface type specified, the
information about all layer 3 interfaces of the specified type is displayed; with both
the interface type and interface number specified, only the information about the
specified interface is displayed.
Note that:
If you have configured the time slots of a CE1/PRI or CT1/PRI interface as an ISDN
PRI group using the pri-set command, then executing the display ip interface
brief command only displays the time slot used by the control channel (D
channel), instead of the ones used by the user channels (B channels). For details
about CE1/PRI and CT1/PRI interfaces, refer to “Fundamental CE1/PRI Interface
Configuration Commands” on page 201 and “Fundamental CT1/PRI Interface
Configuration Commands” on page 213.
Related command: display ip interface.
n
E1/T1 interfaces are time slotted. Using the pri-set command can bind time slots of
an E1/T1 interface into an ISDN PRI group, with each time slot corresponding to a
serial interface. To make the displayed output simple and clear, only the time slot
of the control channel (D channel) is displayed regardless of whether the display
ip interface brief command has an interface included or not.
Example # Display brief information about Ethernet 1/0.
DHCP packet deal mode DHCP packet processing mode. This field
appears on a DHCP-supporting device and
can be one of the following values:
■ global: The DHCP server with the global
address pool is enabled on the
interface.
■ relay: The DHCP relay agent is enabled
on the interface.
Table 154 Description on fields of the display ip interface command
Field Description