Filter
Top Products
1586 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
display mpls static-cr-lsp
Syntax display mpls static-cr-lsp [ lsp-name lsp-name ] [ { exclude | include } ip-address
prefix-length ] [ verbose ]
View Any view
Parameter lsp-name lsp-name: Label switched path name comprising 1 to 15 characters.
exclude: Displays only CR-LSPs with destination IP addresses other than the one
specified by the ip-address prefix-length arguments.
include: Displays only CR-LSPs with the destination IP address specified by the
ip-address prefix-length arguments.
ip-address: Destination IP address.
prefix-length: IP address prefix length, in the range 0 to 32.
verbose: Displays detailed information.
Description Use the
display mpls static-cr-lsp command to display information about static
CR-LSPs.
Example # Display brief information about all static CR-LSPs.
<Sysname> display mpls static-cr-lsp
total statics-cr-lsp : 1
RecAckCounter Number of received Ack messages
SendPathErrCounter Number of transmitted PathErr messages
RecPathErrCounter Number of received PathErr messages
SendResvErrCounter Number of transmitted ResvErr messages
RecResvErrCounter Number of received ResvErr messages
SendPathTearCounter Number of transmitted PathTear messages
RecPathTearCounter Number of received PathTear messages
SendResvTearCounter Number of transmitted ResvTear messages
RecResvTearCounter Number of received ResvTear messages
SendSrefreshCounter Number of transmitted Srefresh messages
RecSrefreshCounter Number of received Srefresh messages
SendAckMsgCounter Number of transmitted AckMsg messages
RecAckMsgCounter Number of received AckMsg messages
SendErrMsgCounter Number of transmitted errors
RecErrMsgCounter Number of received errors
RecReqFaultCounter Number of request failures
Table 403 Description on the fields of the display mpls rsvp-te statistics command
Field Description