Filter
Top Products
2456 CHAPTER 164: USER INTERFACE CONFIGURATION COMMANDS
display users
Syntax display users [ all ]
View Any view
Parameter all: Displays information about users on all user interfaces.
Description Use the
display users command to view the user information using the device.
Use the display users all command to view the user information of all the user
interfaces supported on the device.
Example # Display the user information of the current user interface.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
+ 178 VTY 0 00:00:00 TEL 3
179 VTY 1 00:02:34 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.1.54
VTY 1 :
Location: 192.168.1.58
+ : Current operation user.
F : Current operation user work in async mode.
Table 635 Description on the fields of the display user-interface summary command
Field Description
User interface type Type of user interface (CON/TTY/AUX/VTY)
0:X 0 represents the absolute number of the user interface. X
means this user interface is not used; U means this user
interface is in use; the number of the character X and U
indicates the total number of user interfaces.
character mode users. (U) Number of mode users, that is, the number of character
U.
UI never used. (X) Number of user interfaces not used, that is, the number
of character X.
total UIs in use Total number of user interfaces in use.
Table 636 Description on the fields of the display users command
Field Description
Idx Absolute number of the user interface
UI The first number and the second number are respectively the absolute index
and relative index of the user interface.
Delay Interval since the last input, in the format of hh:mm:ss.
Type User type, such as Telnet, SSH, or PAD