Filter
Top Products
2722 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS
With the RADIUS accounting function enabled, the RADIUS server will perform
accounting for all users who use this access number. With the function disabled,
the RADIUS server will not perform accounting for users who dial the access
number.
Related command: gw-access-number, acct-method, and accounting-did.
Example # Enable the RADIUS accounting function for users who dial the access number
17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909] accounting
# Disable the RADIUS accounting function for users who dial the access number
17909.
[Sysname-voice-dial-anum17909] undo accounting
accounting-did
Syntax accounting-did
undo accounting-did
View Voice AAA client view
Parameter None
Description Use the
accounting-did command to enable the RADIUS accounting function
for all one-stage dialing users.
Use the
undo accounting-did command to disable the RADIUS accounting
function.
By default, the RADIUS accounting function is disabled for all one-stage dialing
users.
On one voice gateway, the RADIUS accounting for one-stage dialing users is
separated from that for two-stage dialing users. This command is applicable to
only one-stage dialing users. With this function enabled, the RADIUS server will
perform RADIUS accounting for all calls originated by one-stage dialing users.
With this function disabled, the RADIUS server will not perform accounting for any
calls originated by one-stage dialing users.
Related command: acct-method and accounting.
Example # Enable the accounting function for all one-stage dialing users.