Filter
Top Products
830 CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS
Example # Display IPv6 DNS server information.
<Sysname> display dns ipv6 server
Type:
D:Dynamic S:Static
DNS Server Type IPv6 Address (Interface Name)
1 S 1::1
2 S FE80:1111:2222:3333:4444:5555:6666:7777 Vlan2
display ipv6 fib
Syntax display ipv6 fib [ ipv6-address ]
View Any view
Parameter ipv6-address: Destination IPv6 address whose IPv6 forwarding information base
(FIB) entries are to be displayed.
Description Use the
display ipv6 fib command to display IPv6 FIB entries. If no argument is
specified, all IPv6 FIB entries will be displayed.
Example # Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
Label : NULL Tunnel ID : 0
TimeStamp : Date- 12/5/2004, Time- 9:15:18
Interface : InLoopBack0
Table 171 Description on the fields of the display dns ipv6 server command
Field Description
DNS Server Sequence number of the DNS server, which is assigned
automatically by the system, starting from 1.
Type Type of DNS server, where “S” represents a statically configured
DNS server, and “D” represents a DNS server obtained dynamically
through DHCP.
IPv6 Address IPv6 address of the DNS server
Interface Name Name of the interface on the DNS server whose IP address is an IPv6
link-local address.
Table 172 Description on fields of the display ipv6 fib command
Field Description
Total number of Routes Total number of routes in the FIB
Destination Destination address to which a packet is to be forwarded
PrefixLength Prefix length of the destination address
NextHop Next hop of the route to the destination