Filter
Top Products
377
<Sysname> display fr map-info
Map Statistics for interface Serial2/0 (DTE)
DLCI = 100, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:48:44, status = ACTIVE
encapsulation = ietf, vlink = 14, broadcast
DLCI = 200, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:34:42, status = ACTIVE
encapsulation = ietf, vlink = 0, broadcast
DLCI = 300, IP 1.1.1.1, Serial2/0
create time = 2002/10/21 15:03:35, status = ACTIVE
encapsulation = ietf, vlink = 15
display fr map-info pppofr
Syntax display fr map-info pppofr [ interface interface-type { interface-number |
interface-number.subnumber }]
View Any view
Parameter interface interface-type { interface-number | interface-number.subnumber }:
Specifies an interface by its type and number. It can be a main or subinterface. The
interface-type argument is an interface type. The interface-number argument is a
main interface number. The subnumber argument is a subinterface number, in the
range 0 to 1023.
Description Use the
display fr map-info pppofr command to display current PPP over
frame relay (PPPoFR) mappings and their states for the specified or all interfaces.
Example # Display information about current PPPoFR mappings and their states.
<Sysname> display fr map-info pppofr
Fr Interface DLCI Fr State PPP Interface PPP Phase
Serial2/0 100 down Virtual-Template1 Phase:0
Serial2/1 200 down Virtual-Template2 Phase:0
Table 45 Description on the fields of the display fr map-info command
Field Description
Map Statistics for interface
Serial2/0 (DTE)
Display the frame relay address map. The interface operates
in DTE mode.
DLCI = 100, IP INARP
100.100.1.1, Serial2/0
The PVC with DLCI 100 is mapped to remote IP address
100.100.1.1 through INARP. The PVC is configured on the
interface Serial2/0 (If the keyword INAPP is not provided,
you need to manually configure established address
mapping.)
create time = 2002/10/21
14:48:44
Time and date when the map entry was created
status = ACTIVE State of the map entry
encapsulation = ietf Encapsulation is set to IETF
broadcast Broadcasts are permitted