Filter
Top Products
1256 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 preferred-value 50
peer public-as-only (IPv6 address family view)
Syntax peer { ipv6-group-name | ipv6-address } public-as-only
undo peer { ipv6-group-name | ipv6-address } public-as-only
View IPv6 address family view
Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description Use the
peer public-as-only command to configure IPv6 BGP updates to a
peer/peer group to not carry private AS numbers.
Use the
undo peer public-as-only command to allow IPv6 BGP updates to a
peer/peer group to carry private AS numbers.
By default, BGP updates carry the private AS number.
The command does not take effect if the BGP update has both the public AS
number and private AS number. The range of private AS number is from 64512 to
65535.
Examples # Carry no private AS number in BGP updates sent to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 public-as-only
peer reflect-client (IPv6 address family view)
Syntax peer { group-name | ipv4-address | ipv6-address } reflect-client
undo peer { group-name | ipv4-address | ipv6-address } reflect-client
View IPv6 address family view
Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.