Filter
Top Products
1967
port-number: UDP port number of the secondary accounting server, which ranges
from 1 to 65535 and defaults to 1813.
Description Use the secondary accounting command to configure the IP address and UDP
port of the secondary RADIUS accounting server.
Use the
undo secondary accounting command to restore the defaults.
Note that:
■ The IP addresses of the primary and secondary accounting servers cannot be
the same. Otherwise, the configuration fails.
■ The RADIUS service port configured on the device and that of the RADIUS
server must be consistent.
Related command: key (RADIUS scheme view), radius scheme, state.
Example # Set the IP address of the secondary accounting server for RADIUS scheme
radius1 to 10.110.1.1 and the UDP port of the server to 1813.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
secondary authentication (RADIUS scheme view)
Syntax secondary authentication ip-address [ port-number ]
undo secondary authentication
View RADIUS scheme view
Parameter ip-address: IP address of the secondary authentication/authorization server, in
dotted decimal notation. The default is 0.0.0.0.
port-number: UDP port number of the secondary authentication/authorization
server, which ranges from 1 to 65535 and defaults to 1812.
Description Use the
secondary authentication command to configure the IP address and
UDP port of the secondary RADIUS authentication/authorization server.
Use the
undo secondary authentication command to restore the defaults.
Note that:
■ The IP addresses of the primary and secondary authentication/authorization
servers cannot be the same. Otherwise, the configuration fails.
■ The RADIUS service port configured on the device and that of the RADIUS
server must be consistent.