Filter
Top Products
1319
Parameters process-id: RIPng process number, in the range of 1 to 65535.
Description Use the
ripng enable command to enable RIPng on the specified interface.
Use the
undo ripng enable command to disable RIPng on the specified
interface.
By default, RIPng is disabled on an interface.
Examples # Enable RIPng100 on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng 100 enable
ripng metricin
Syntax ripng metricin value
undo ripng metricin
View Interface view
Parameters value: Additional metric to received routes, in the range of 0 to 16.
Description Use the
ripng metricin command to specify an additional metric for received
RIPng routes.
Use the
undo ripng metricin command to restore the default.
By default, the additional metric to received routes is 0.
Related commands: ripng metricout.
Examples # Specify the additional routing metric as 12 for RIPng routes received by
Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng metricin 12
ripng metricout
Syntax ripng metricout value
undo ripng metricout
View Interface view