Filter
Top Products
2423
cipher: Cipher text password.
password: Password, a string of characters. It is case-sensitive string.
■ For simple password, it is a string of 1 to 16 characters.
■ For cipher password, it is a string of 1 to 16 characters in plain text or 24
characters in cipher text. For example, the simple text “1234567” corresponds
to the cipher text “(TT8F]Y5SQ=^Q‘MAF4<1!!”.
Description Use the
super password command to set the password needed to switch from a
lower user level to a higher one.
Use the
undo super password command to restore the default.
By default, no password is set to switch from a lower user level to a higher one.
Note that:
■ If simple is specified, the configuration file saves a simple password.
■ If cipher is specified, the configuration file saves a cipher password.
■ The user must always enter a simple password, no matter simple or cipher is
specified.
■ Cipher passwords are recommended, as simple ones are easily getting cracked.
Example # Set the password to abc in simple form for switching user-level to 3.
<Sysname> system-view
[Sysname] super password level 3 simple abc
# Display the password for switching user-level.
[Sysname] display current-configuration
#
super password level 3 simple abc
# Set the password to abc in cipher form for switching user-level to 3.
<Sysname> system-view
[Sysname] super password level 3 cipher abc
# Display the password for switching user-level.
[Sysname] display current-configuration
#
super password level 3 cipher =‘*Y=F>*.%-a_SW8MYM2A!!
sysname
Syntax sysname sysname
undo sysname