Filter
Top Products
96
MPLS TE CONFIGURATION
COMMANDS
n
MPLS TE is available on these interfaces: synchronous/asynchronous serial
interface (Serial), asynchronous serial interface (Async), Layer 3 Ethernet interface
(Ethernet, GE, XGE), ATM interface, POS interface, Layer 3 virtual Ethernet
interface (Virtual-Ethernet), virtual template interface, MP group interface, MFR
interface, tunnel interface, and VLAN interface.
add hop
Syntax add hop ip-address1 [ include [ loose | strict ] | exclude ] { after | before }
ip-address2
View Explicit path view
Parameter ip-address1: IP address or Router ID of the node to be inserted in the explicit path,
in dotted decimal notation.
include: Includes the specified IP address in the explicit path.
loose: Indicates that the next hop is a loose node which is not necessarily directly
connected to the specified node.
strict: Indicates that the next hop is a strict node which must be directly
connected to the specified node.
exclude: Excludes the node identified by the ip-address1 argument from the
explicit path. Excluded addresses are not considered in path calculation.
after: Inserts the node identified by the ip-address1 argument after the reference
node.
before: Inserts the node identified by the ip-address1 argument before the
reference node.
ip-address2: IP address of the reference node, in dotted decimal notation.
Description Use the
add hop command to insert a node to the explicit path.
By default, the specified node is included in the explicit path and its next hop is a
strict node.
Example # Insert 3.3.29.3 behind 3.3.10.5 on the explicit path PL and exclude this IP
address in path calculation.