Filter
Top Products
1813
Examples # Apply the priority list 12 to the Ethernet 1/0.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] qos pq pql 12
qos pql default-queue
Syntax qos pql pql-index default-queue { bottom | middle | normal | top }
undo qos pql pql-index default-queue
View System view
Parameters pql-index: PQL index, in the range 1 to 16.
top, middle, normal and bottom: Corresponds to the four levels of priority
queue, in descending order. The queue defaults to normal.
Description Use the
qos pql default-queue command to designate the packets without
corresponding rules to a default queue.
Use the
undo qos pql default-queue command to cancel the configuration
and restore the default value.
During traffic classification, if a packet does not match any rule, it will be put into
the default priority queue.
For the same pql-index, repeated use of this command will set new default queue.
Related commands: qos pql inbound-interface, qos pql protocol, qos pql queue, qos pq.
Examples # Set the default queue of the packets matching no rules in PQL 12 to be the
bottom queue.
<Sysname> system-view
[Sysname] qos pql 12 default-queue bottom
qos pql inbound-interface
Syntax qos pql pql-index inbound-interface interface-type interface-number queue { bottom
| middle | normal | top }
undo qos pql pql-index inbound-interface interface-type interface-number
View System view
Parameters pql-index: PQL index, in the range 1 to 16.
interface-type interface-number: Specifies an interface by its type and number.