Filter
Top Products
1375
undo peer peer-address mesh-group
View Public instance MSDP view, VPN instance MSDP view
Parameter peer-address: MSDP peer address.
name: Mesh group name, a string of 1 to 32 characters (case sensitive).
Description Use the
peer mesh-group command to configure an MSDP peer as a mesh
group member.
Use the
undo peer mesh-group command to remove an MSDP peer as a mesh
group member.
By default, an MSDP peer does not belong to any mesh group.
Example # In the public instance, configure the MSDP peer with the IP address of
125.10.7.6 as a member of the mesh group “Grp1”.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 mesh-group Grp1
peer minimum-ttl
Syntax peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
View Public instance MSDP view, VPN instance MSDP view
Parameter peer-address: MSDP peer address.
ttl-value: Time to live (TTL) value, in the range of 0 to 255.
Description Use the
peer minimum-ttl command to configure the minimum TTL value of
multicast packets encapsulated in SA messages.
Use the
undo peer minimum-ttl command to restore the default setting.
By default, the minimum TTL value of a multicast packet encapsulated in an SA
message is 0.
Related command: display msdp peer-status.
Example # In the public instance, set the minimum TTL value of multicast packets to be
encapsulated in SA messages to 10 so that only multicast packets whose TTL value
is larger than or equal to 10 can be forwarded to the MSDP peer 110.10.10.1.