Filter
Top Products
1097
UPDT: Adding Redist Address ipAddress into
pduLevel LSPs,
The redistributed route was being added to
the local LSPs.
UPDT: Updating LSP Option Success IS-IS updated the LSP TLV successfully.
UPDT: Error Adding Summary Reachability in
pduLevel LSPs
IS-IS failed to add a summary address to the
local LSPs.
Table 255 Description on the fields of the debugging isis sending-packet-content
command
Field Description
Sending pduLevel pduType on circuitName. IS-IS is sending a PDU.
pduLevel: L1 or L2.
pduTyp: PDU type, which can be PSNP or
CSNP.
circuitName: Name of the sending interface.
** ** ** ** ** ** ** ** ** ** ** ** ** **
** ** ** ** **** ** ** ** ** **
Contents in the corresponding CSNP/PSNP
packet, including the header, LSP entries, and
Authentication Information field.
Table 256 Description on the fields of the debugging isis snp-packet command
Field Description
CSNP Range from startLspId to endLspId Range of received CSNP packets
startLspId: Start LSP ID.
endLspId: End LSP ID.
Rxed pduType From sourceId (circuitName) PDUs were received.
pduType: PDU type, which can be PSNP or
CSNP.
sourceId: Source NSAP address of the packet.
circuitName: Name of the receiving interface.
SNP PDU Dropped SNP PDU was dropped.
Sending Level pduLevel PSNP PDU fails Sending a PSNP packet failed.
pduLevel: PDU packet level, which can be L1
or L2.
Sending content on circuitName A PSNP packet is being sent.
circuitName: Name of the sending interface.
content: PSNP packet content.
SNP not processed, System in Low Memory System memory was insufficient; therefore,
the SNP packets were not processed.
SNP not processed, System in Overload State
(Low Memory).
The system is in the Overload state; therefore,
the SNP packets were not processed.
Psnp not processed, current IS is Not DIS The current IS was not a DIS; therefore, the
received PSNP packet was not processed.
Csnp not processed on DIS The CSNP packet was not processed on the
DIS.
SNP Authentication Failure SNP authentication failed.
Table 254 Description on the fields of the debugging isis self-originate-update command
Field Description