Filter
Top Products
1676 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
Description Use the display bgp vpnv4 group command to display information about a
specified or all BGP VPNv4 peer groups.
Example # Display information about BGP VPNv4 peer group a for VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group a
BGP peer-group is a
remote AS number not specified
Type : external
Maximum allowed prefix number: 150000
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 99
No routing policy is configured
Members:
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 4 200 18 21 0 1 00:12:58 Established
display bgp vpnv4 network
Syntax display bgp vpnv4 { all | vpn-instance vpn-instance-name } network
View Any view
Table 444 Description on the fields of the display bgp vpnv4 group command
Field Description
BGP peer-group Name of the BGP peer group
remote AS number Number of the remote AS
Type Type of the BGP peer group
Maximum allowed prefix number Maximum number of routes that the VPN instance
supports
Threshold Threshold value
Configured hold timer value Setting of the hold timer
Keepalive timer value Keepalive interval
Minimum time between
advertisement runs
Minimum route advertisement interval
Peer Preferred Value Weight for the routes from the peer
No routing policy is configured Whether the VPN instance is configured with a routing
policy
Peer IP address of the peer
V Version of BGP that the peer runs
AS AS number of the peer group
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages waiting to be sent to the peer
PrefRcv Number of prefixes received
Up/Down Duration of the BGP session in the current state
State Status of the peer