Filter
Top Products
1459
Description Use the timer other-querier-present command to configure the MLD other
querier present interval globally.
Use the
undo timer other-querier-present command to restore the default
configuration.
By default, the MLD other querier present interval is determined by the following
formula:
MLD other querier present interval = [ MLD query interval ] times [ MLD querier
robustness variable ] plus [ maximum response delay for MLD general queries ]
divided by two.
n
By default, the values of the three parameters in the above-mentioned formula are
125, 2, and 10, respectively, so the default MLD other querier present interval is
125 x 2 + 10 / 2 = 255 (seconds).
Related command: mld timer other-querier-present, timer query (MLD view), robust-count
(MLD view), max-response-time (MLD view), and display mld interface.
Example # Set the MLD other querier present interval for non-queriers to 200 seconds
globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer other-querier-present 200
timer query (MLD view)
Syntax timer query interval
undo timer query
View MLD view
Parameter interval: Query interval, namely, amount of time in seconds between MLD general
query messages, in the range of 1 to 18,000.
Description Use the
timer query command to configure the query interval globally.
Use the
undo timer query command to restore the default configuration.
By default, the query interval is 125 seconds.
Related command: mld timer query, timer other-querier-present (MLD view), and display mld
interface.
Example # Set the query interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer query 200