Filter
Top Products
2569
g729: Specifies the packetization period for g729 codec. It ranges from10 to 180
milliseconds and defaults to 30 milliseconds.
time-length: Packetization period for a codec.
Description Use the default entity payload-size command to configure the default
packetization period for a codec.
Use the
undo default entity payload-size command to restore the default.
Example # Set the packetization period for G.711 codec to 30 milliseconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] default entity payload-size g711 30
default entity vad-on
Syntax default entity vad-on
undo default entity vad-on
View Voice dial program view
Parameter None
Description Use the
default entity vad-on command to globally configure enabling silence
detection as the default value.
Use the
undo default entity vad-on command to restore the fixed value (i.e.
disabling the silence detection) to be the default value.
By default, the silence detection is disabled.
The default entity vad-on command is used to globally enable silence detection
and make it as the default setting. After the configuration, all the voice entities
and newly created voice entities on this router, which have not been configured
with this function, will inherit this configuration (note that G. 711 does not
support silence detection).
Related command: vad-on.
Example # Enable the silence detection globally.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] default entity vad-on