Filter
Top Products
1601
display ospf traffic-adjustment
Syntax display ospf [ process-id ] traffic-adjustment
View Any view
Parameter process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
display ospf traffic-adjustment command to display the settings of
tunnel traffic adjustment (IGP shortcut and forwarding adjacency) for a specified
or all OSPF processes.
Example # Display the settings of tunnel traffic adjustment for all OSPF processes.
<Sysname> display ospf traffic-adjustment
OSPF Process 100 with Router ID 100.0.0.1
Traffic adjustment
Interface: 100.0.0.1 (Tunnel0)
Type: Forwarding Adjacency State: Up
Neighbor ID: 100.0.0.2 Cost: 100
Configuration:
Neighbor Ip Address: 100.0.0.2
Cost : -10
Cost Type : Relative
Hold time : 10s
Local Interface Address Local interface address
Remote Interface Address Remote interface address
TE Metric TE metric
Maximum bandwidth Maximum bandwidth
Maximum reservable bandwidth Maximum reservable bandwidth
Admin Group Administrative group attribute
Global Pool Global pool
Unreserved BW [0] to [7] Available bandwidths at the eight levels in the global pool
Sub Pool Subpool (only significant for DS-TE LSAs)
Unreserved BW [0] to [7] Available bandwidths at the eight levels in the subpool
Bandwidth Constraints Bandwidth constraints (only significant for DS-TE LSAs)
BC 0-1 Two types of bandwidth constraints (only significant for
DS-TE LSAs): BC0 and BC1
Local Overbooking Multipliers Local overbooking multipliers
LOM 0-1 Two local overbooking multipliers (only significant for DS-TE
LSAs): LOM 0 and LOM 1
Table 418 Description on the fields of the display ospf mpls-te command
Field Description
Table 419 Description on the fields of the display ospf traffic-adjustment command
Field Description
Interface Tunnel interface address and name