Filter
Top Products
2259
license register
Syntax license register serial-number
View User view
Parameter serial-number: Specifies the serial number of a card, in the format of
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, in which X represents a
character. The character can be a letter (case sensitive), a number, + or (/).
Description Use the
license register command to register the software serial number for a
device.
The serial number can be obtained by purchasing letter of authorization. To
successfully register a serial number, you must enter the serial number in the
specified format.
n
Only users at management level can execute this command.
Example # Register the software serial number of a device.
<Sysname> system-view
[Sysname] license register VZa47-6AbBh-gtO9c-K47A0-F79D8-dE84O-tg2j0
Register successfully!
reboot
Syntax reboot [ slot slot-number ]
View User view
Parameter slot slot-number: Specifies the slot number of a card. The value range varies with
devices.
Description Use the
reboot command to reboot a card or a device.
c
CAUTION:
■ This command reboots the device, thus resulting in service interruption. Please
use it with caution.
■ If a primary boot file fails or does not exist, the device cannot be rebooted with
this command. In this case, you can re-specify a primary boot file to reboot the
device, or you can power off the device then power it on and the system
automatically uses the secondary boot file to restart the device.
■ The slot keyword is applicable on an MSR 50 series router only.
Example # Reboot the device.