Filter
Top Products
2546 CHAPTER 172: IPX CONFIGURATION COMMANDS
Parameter None
Description Use the
ipx sap gns-load-balance command to configure the router to respond
to GNS requests in the Round-robin method.
Use the
undo ipx sap gns-load-balance command to configure the router to
respond with the nearest server.
By default, the Round-Robin mode is used, that is, the router informs the clients of
servers in turn lest a server shoulders too much pressure.
Related command: ipx sap gns-disable-reply.
Example # Configure the router to respond to clients with the nearest server.
<Sysname> system-view
[Sysname] undo ipx sap gns-load-balance
ipx sap max-reserve-servers
Syntax ipx sap max-reserve-servers length
undo ipx sap max-reserve-servers
View System view
Parameter length: Maximum reserve queue length of the same type service information,
ranging from 1 to 2,048.
Description Use the
ipx sap max-reserve-servers command to specify the maximum
reserve queue length of the same type service information.
Use the
undo ipx sap max-reserve-servers command to restore the default.
By default, the value is 2,048.
If a newly configured value is smaller than the previous one, the excessive items in
the service information table (SIT for short) will not be deleted. If the service
information item number for the same service type exceeds the maximum value,
new service information will not be added.
Example # Set the maximum reserve queue length of the same type service information to
1,024.
<Sysname> system-view
[Sysname] ipx sap max-reserve-servers 1024
ipx sap mtu
Syntax ipx sap mtu bytes