Filter
Top Products
894 CHAPTER 69: IPV6 UNICAST POLICY ROUTING CONFIGURATION COMMANDS
<Sysname> display ipv6 policy-based-route
Policy Name interface
pr02 local
pr02 Virtual-Template0
pr01 Ethernet 1/0
display ipv6 policy-based-route setup
Syntax display ipv6 policy-based-route setup { policy-name | interface interface-type
interface-number | local }
View Any view
Parameter policy-name: Policy name, a string of 1 to 19 characters.
interface interface-type interface-number: Displays policy routing information on
the specified interface.
local: Displays system policy routing information.
Description Use the
display ipv6 policy-based-route setup command to display specified
IPv6 policy routing configuration information.
Example # Display specified IPv6 policy routing configuration information.
<Sysname> display ipv6 policy-based-route setup local
Local policy based routing configuration information:
ipv6 policy-based-route : test
Node 6 permit :
if-match acl6 2000
Node 10 permit :
apply destination-based-forwarding
Table 193 Description on fields of the display ipv6 policy-based-route command
Field Description
Local System policy routing
pr02 Policy name
Virtual-Template0 Policy pr02 applied to Virtual-template0
Ethernet1/0 Policy pr01 applied to Ethernet1/0
Table 194 Description on fields of the display ipv6 policy-based-route setup command
Field Description
ipv6 policy-based-route : test Name of the referenced policy
Node 6 permit The match mode of Node 6 is permit.
if-match acl6 2000 IPv6 packets matching IPv6 ACL 2000
are permitted.
Node 10 permit The match mode of Node 10 is permit.
apply destination-based-forwarding Enable destination based forwarding
for denied IPv6 packets