Airlink PinPoint EDGE/GPRS Network Router User Manual


 
PinPoint EDGE/GPRS - User Guide, version 2.32 95
AT Commands: SMTP (including SMS)
This group includes commands specific to messaging.
FIGURE 1. Common : SMTP
SMTP (including SMS)
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email transmission across the
Internet. The
PinPoint can send messages using SMTP if it has been configured to use a mail
server.
SMS (Short Message Service) is another way to send messages via Your Wireless Service Pro-
vider’s cellular network.
Caution: Your account with Your Wireless Service Provider may not support mes-
sage sending with SMS. For most SMS commands (those not proceeded by *),
you will need to have the modem in PassThru mode.
*SMTPADDR=[d.d.d.d][name][nom]
Specify the IP address or Fully Qualified Domain Name (FQDN) of the SMTP server to use.
d.d.d.d=IP Address
name=domain name
Maximum: 40 characters.
*SMTPFROM=email
Sets the email address from which the SMTP message is being sent.
email= email address
Maximum: 30 characters.
*SMTPPW=password
Sets the password to use when authenticating the email account (*SMTPFROM) with the server (*SMT-
PADDR).
pass= password