Filter
Top Products
PinPoint EDGE/GPRS - User Guide, version 2.32 75
AT Commands: Misc (Miscellaneous)
*NETUID=uid
*STATICIP=d.d.d.d
The login that is used to login to Your Wireless Service Provider’s cellular network, when
required.
uid=user id (up to 64 bytes)
Set the static IP required to be received from the network. If the modem does not get this IP
address from the network, it will reset the internal hardware and try again. The default is
0.0.0.0, which allows any IP address from the network.
d.d.d.d=IP address
Example: AT*STATICIP=192.168.1.23
Caution: *STATICIP does not set the IP address of the modem, it merely tells the
modem which IP address to expect. If the expected IP address is not granted while
registering on the cellular network, the modem will try to register on the network
again until it receives that IP address. If your account is set up for a dynamic IP
address and you set an address for *STATICIP, you may not be able to register on
the network at all since there is no guarentee you will receive the same dynamic IP
address again.