Filter
Top Products
PinPoint EDGE/GPRS - User Guide, version 2.32 104
AT Commands: Logging
This group includes commands specific to the internal log.
*DBGCOMMLVL=n
*DBGIPLVL=n
*DBGPPPLVL=n
Logging
Caution: Logging is intended for diagnostic purposes only. Extensive use of log-
ging features can cause degraded modem performance.
The commands displayed in Wireless Ace and the results of those commands depends on the
model of the modem.
FIGURE 1. Logging
Set the logging level for the host or module COM port.
n=0 : No logging
n=1 : Host COM
n=2 : Module COM
Sets the logging level for the IP subsystem.
n=0 : No logging
n=1 : Log errors (i.e. invalid/corrupt packets, etc.).
n=2 : Log the header of all received packets. Note that this can quickly exhaust available space for the
event log.
n=3 : Log the header of all received and sent packets. Note that this can quickly exhaust available space
for the event log.
Sets the logging level for the PPP stack.
Enables logging at different levels of detail.
n=0 : No logging
n=1 : Log client events (default)
n=2 : Log server events