Airlink PinPoint EDGE/GPRS Network Router User Manual


 
PinPoint EDGE/GPRS - User Guide, version 2.32 134
Windows Dial-up Networking (DUN)
FIGURE 24. MS Windows XP: Connect
For some accounts, you need to enter the User name and Password provided by Your Wireless
Service Provider for the cellular account.
Select Dial to connect to the modem and the cellular network. When you’re connected, an icon
should appear in the system tray showing the connection status.
FIGURE 25. MS Windows XP: Connect
Establishing a DUN Connection with Windows Networking
1.
Start the DUN session.
Start > Connect To > AirLink 3G Connection (or whatever you named the connection).
You can also enter these parameters beforehand using *NETUID and *NETPW
(refer to the AT Commands, page
59).
2.
Connect to the network.
Note: The speed shown in the connection is the speed between the modem and
your computer, it is not the speed of the modem’s connection to the Carrier or the
Internet.
Note: For DUN connections on a Windows Mobility or other non-personal com-
puter, the DNS settings may not be configured with the DUN connection. You
may need to go into the network settings and add DNS servers manually.