Filter
Top Products
PinPoint EDGE/GPRS - User Guide, version 2.32 98
AT Commands: Other
*IPPINGADDR=[d.d.d.d][name]
*MSCIUPDADDR=name[/port]
*MSCIUPDPERIOD=n
*NETWDOG=n
*SNMPCOMMUNITY=n
*SNMPPORT=n
*SNMPSECLVL=n
n=15-255 minutes
n=0 : Disable pinging (default)
15 minutes is the minimum interval which can be set for Keepalive.
See also *MINXMIT which can override this value.
Set the IP address or valid internet domain name for the PinPoint to ping to keep itself alive
(online). *IPPING must to be set to a value other than 0 to enable pinging.
d.d.d.d=IP address
name= domain name
Modem Status Update Address - where Name/Port is the domain name and port of the
machine where the modem status updates will be sent. The PinPoint's status parameters are
sent in an XML format.
name=domain name
port=port
Modem Status Update Period - where n defines the update period in seconds.
n=1-255 seconds
n=0 : Disabled.
Network connection watchdog: The number of minutes to wait for a network connection. If no
connection is established within the set number of minutes, the PinPoint resets.
n=minutes Default = 20 min.
n=0 : Disabled.
The SNMP Community String acts like a password to limit access to the modem’s SNMP data.
n=a string of no more than 20 characters (default = public).
This controls which port the SNMP Agent listens on.
n=1-65535
n=0 : SNMP is disabled.
Selects the security level requirements for SNMP communications as follows: