Airlink PinPoint EDGE/GPRS Network Router User Manual


 
PinPoint EDGE/GPRS - User Guide, version 2.32 16
IP Manager and DNS
Dynamic Names
When an IP address is not expected to change, the DNS server can indicate to all queries that the
address can be cached and not looked up for a long period of time. Dynamic DNS servers, con
-
versely, have a short caching period for the domain information to prevent other Internet sites or
queries from using the old information. Since the IP address of a modem with a dynamic account
can change frequently, if the old information was used (such as with a DNS server which indicates
the address can be cached for a long period of time) when the IP address changed, the domain
would no longer point to the new and correct IP address of the modem.
If your PinPoint is configured for Dynamic IP, when it first connects to the Internet, it sends a IP
change notification to IP Manager. IP Manger will acknowledge the change and update the
Dynamic DNS server. The new IP address will then be the address for your PinPoint’s configured
name.
Once your PinPoint’s IP address has been updated in IP Manager, it can be contacted via name. If
the IP address is needed, you can use the domain name to determine the IP address.
Configuring the PinPoint for IP Manager and a Dynamic IP
Domain Name
To configure the Dynamic IP settings in your PinPoint so that it will use IP Manager, you can use
Wireless Ace or a terminal application to enter the commands (page
59).
To configure your AirLink modem to be addressed by name, the modem needs to have 4 elements
configured. You can configure a second dynamic server as a backup, secondary, or alternate server.
In Wireless Ace, select Dynamic IP.
FIGURE 1. Wireless Ace: Dynamic IP
Note: The fully qualified domain name of your PinPoint will be a subdomain of the
domain used by the IP Manager server.
car54-2007
eairlink.com
edns2.eairlink.com
eairlink.com