Airlink PinPoint EDGE/GPRS Network Router User Manual


 
PinPoint EDGE/GPRS - User Guide, version 2.32 92
AT Commands: PPP/Ethernet
*HOSTPRIVMODE=n
*HOSTPW=string
*HOSTUID=string
d.d.d.d=IP Address
Set or query whether a private or public (network) IP is to be used when the Host initiates a
EDGE/GPRS connection to the modem.
n=0 : Public (network) IP Mode: When the Host initiates a PPP connection, the host will be given the
network IP address that was obtained from Your Wireless Service Provider while registering on the net-
work. If the network issues a new IP address, the EDGE/GPRS connection will be closed (since the IP
address has changed) and has to be re-initiated. (default).
n=1 : Private IP Mode: When the Host initiates a EDGE/GPRS connection, the host will be given the IP
address specified in *HOSTPRIVIP. The modem will then perform 1 to 1 NAT-like address translation,
which shields the Host from network IP changes.
Host Password forPAP or CHAP.
string=password
Host User ID forPAP or CHAP.
string=user id (up to 64 bytes)