Filter
Top Products
PinPoint EDGE/GPRS - User Guide, version 2.32 58
Specifications for the PinPoint EDGE/GPRS
Power Management:
• Advanced Power Management features
• Low power consumption
• Dormant connection (idle for 10-20 seconds): 60 mA at 12 VDC
• Input Voltage: 9 VDC to 28 VDC
• Input Current: 20 mA to 350 mA
• Typical Transmit/Receive: 300ma at 12VDC
• Low power mode: 20 mA at 12 VDC
Power consumption
Modem Idle Transmitting
PinPoint 80 mAh 300 mAh
Serial Port Pinouts
The cable between the PinPoint and a computer or other serial device needs to be wired straight-
through (pin 1 goes to pin 1, pin 2 to pin 2, etc.). If your end device connected to the PinPoint is a
DCE device, you will need a null-modem cable.
FIGURE 1. : Female DB-9 DCE