Filter
Top Products
Feature Operation
Issue 4 August 2002
1-11
Enabling/Disabling EC500
Enabling and disabling EC500 is accomplished using EC500 Enable and Disable
Feature Access Codes. These need to be set through the System Administration
Terminal and then communicated to the users. See "
Administration" for
procedures to set up these Feature Access Codes). Using these codes, the user
can disable or enable all XMOBILE stations associated with his or her office
number.
EC500 Enable and Disable Feature Access Codes are used in the following way:
■ A user wishes to enable or disable all the EC500 XMOBILE stations using
his or her office telephone. The user enters the following in sequence:
1. The EC500 Enable Feature Access Code or Disable Feature
Access Code.
2. # to bypass entering the office telephone.
3. The office number Station Security Code.
4. A final #.
The user receives either a confirmation or an intercept tone depending
upon the success or failure of the procedure.
■ A user wishes to enable or disable all EC500 XMOBILE stations using an
internal extension that is not his or her office telephone. The user enters
the following in sequence:
1. The EC500 Enable Feature Access Code or Disable Feature
Access Code.
2. The extension number of his or her office number followed by #.
3. The office number Station Security Code.
4. A final #.
The user receives either a confirmation or an intercept tone depending
upon the success or failure of the procedure.
■ A user wishes to enable or disable EC500 XMOBILE stations from any
phone in the external network. Whether it’s the user’s cell phone or another
phone does not make a difference in this procedure. The user enters the
following in sequence:
1. The Avaya EC500 Access Number (Telecommuting Access
Number). The user should receive a dial tone.
2. The EC500 Enable Feature Access Code or Disable Feature
Access Code.
3. The extension number of his or her office number followed by # or
you can skip the extension number and enter only # from an EC500
cell phone that is administered to send office caller ID.