Filter
Top Products
Administration
3-2 Issue 4 August 2002
Setting the Customer Options for EC500
Before you can administer the EC500 extensions, the following settings in the
System-Parameters Customer-Options screen on the System Administration
Terminal must be enabled for your system as determined by the installed license
file.
The fields and their settings are:
■ G3 Version - must be set to V11 or greater.
■ Maximum XMOBILE Stations - must be set to the number of XMOBILE
stations that are to be used for EC500. This number must be greater than
zero. It is usually two times the number of users.
■ Enhanced EC500 - must be set to y. G3 Version and Maximum XMOBILE
Stations must be set as described above before Enhanced EC500 can be
set to
y.
■ ARS - must be set to y.
■ Extended Cvg/Fwd Admin - must be set to y (for access to the
Telecommuting Access Number screen where you set the Avaya EC500
Access Code).
■ ISDN-PRI - must be set to y.