Filter
Top Products
Administration
3-20 Issue 4 August 2002
Changing Configuration Sets
A Configuration Set defines a number of call treatment options for EC500 cell
phone calls. The administration for EC500 allows for the use of up to 10
Configuration Sets, which are already defined in the system using default values.
Each set is administered on a different screen.
The key field is the
Calling Number Style, which can be set to pbx, allowing
a cell phone caller ID display of less than 10-digits or
network, allowing a display
of only 10-digit numbers. Since there are ten Configuration Sets available,
multiple combinations of the options can be administered, thus accommodating
requirements for a variety of Cellular Service Providers.
To customize a Configuration Set,
1. Type
change xmobile configuration-set n (where n = 1 to 10) and press
Enter.
The Configuration Set screen appears.
Figure 3-10. Configuration Set Screen
2. Enter the following fields with the appropriate values:
■ Configuration Set Description - up to 20 characters,
free-form text. Use this to describe the purpose of the configuration
set, for example, “EC500 handsets.”
CONFIGURATION SET: 1
Configuration Set Description:
EC500 handsets
Calling Number Style:
network
CDR for Calls to EC500 Destination?
y
Fast Connect on Origination?
n
Post Connect Dialing Options:
dtmf