Filter
Top Products
Administration
3-14 Issue 4 August 2002
4. Edit the fields shown on the second duplicate Station screen as follows:
■ Ext - This field is read-only. the Ext field can only be changed on
the first duplicate Station screen.
■ Dial Pfx - corresponds to the Dial Prefix field on the
XMOBILE station screen. It is 4 digits in length and may contain the
values 0-9, * and #, or blank. If the same Cell Phone Number is
administered for multiple extensions on the duplicate station screen,
then the
Dial Pfx field associated with each instance of the Cell
Phone Number
field must be the same.
■ Cell Phone Number - typically contains a 3 digit area code plus 7
digit main number, unformatted.
■ Cfg Set - required for EC500 XMOBILE Type. Corresponds to the
Configuration Set field on the first XMOBILE Station screen.
■ Mob Trk Grp - corresponds to the Mobility Trunk Group field
on the first XMOBILE Station screen.
■ Line Appearance - corresponds to the Line Appearance field
on screen 5 of the XMOBILE Station screens. When
brdg-appr is
entered, the
Button Number and Principal Extension fields
appear. The extension and button number for the principal extension
that the XMOBILE extension is bridged to must be entered here.
For all duplicated stations, if the XMOBILE Type of the original station is
EC500, the system defaults the Mapping Mode field to
termination. For
XMOBILE Type DECT and PHS, the Mapping Mode is defaulted to
both.
5. Press Next Page.
The third duplicate Station screen appears.
This is the first in the series of three Station screens that are identical to the
Station screens used to administer the original XMOBILE station. See
Figures Figure 3-1
, Figure 3-2, and Figure 3-3. These screens display the
fields for the XMOBILE station that was used as a basis to duplicate from.
You can modify the fields on these three screens, with the exception of the
fields you have just edited on the first two Duplicate Station screens and
any other fields related to EC500. The fields you have edited on the first
two screens appear on these three screens as follows:
■ Dial Prefix (screen 3) - always blank and read-only.
■ Cell Phone Number (screen 3) - always blank and read-only.
■ Mapping Mode (screen 3) - always matches the original station and
is read-only.
■ Configuration Set (screen 3) - always matches the original
station and is read-only.
■ XMOBILE Type (screen 3) - always matches the original station.