Barco HDX Projector User Manual


 
13. Projector Control
Image 13-29
Default Gateway, input
3. Use the or key to change the selected character.
Use the or key to select another character.
Note: Digits can be en tered with the digit k eys on the remote control or the loca l keypad. When a digit is entered in that way,
the next character will be selected automatically.
13.5.6 Wireless network activation
Can only be used with a wireless network module installed.
What can be done ?
Before a wireless network can be used, the status must be set to On.
How to activate
1. Press Menu to activate the menus and select Projector Control Network Wireless setup.
Image 13-30
Main menu, projector control
Image 13-31
Projector control, network
R5905032 HDX SERIES 02/03/2015 229