Filter
Top Products
8. Input
8.8.2 Create custom EDID file
Description
You can create new custom EDID files and enter the desired input timings.
How to create
1. Press Menu to activate the menus and select Input → EDID → Create.
2. Press ENTER to open the EDID creation menu.
Image 8-44
Main window
Image 8-45
Input, EDID
Image 8-46
EDID, create
Image 8-47
EDID file creation
3. Use the ▲ or ▼ key to select Create.
Press ENTER to open the creation menu.
4. Fill out the Timings section.
Use the ▲ or ▼ key to select a setting.
Use the ◄ or ► key to change the value
or press ENTER to open the specific adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 72.
The following timings must be entered:
- Active Pixels: horizontal resolution
- Active Lines: vertical resolution
- Frequency (Hz): amount of frames per second
5. Select the calculation method to obtain the correct (standard) video timings.
Possible selections:
- CVT: Coordinated Video Timings
- CVT RB: Coordinated Video Timings Reduced Blanking
- CVT MB: Coordinated Video Timings Minimum Blanking (not a standard)
- GTF: Generalized Timing Formula
90
R5905032 HDX SERIES 02/03/2015