Barco HDX Projector User Manual


 
8. Input
Image 8-3
Select source
8.3 Advanced Settings
Overview
About Input Setup
Input conguration
DVI - RGB input
SDI input
5 cable input
HDMI - DisplayPort input (3D input module)
8.3.1 About Input Setup
Overview
Each input module must be congured before these module can beused. This conguration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 4 input slots. Slot 1 and 2 is lled up by default with a DVI and Dual SDI input. Slot 3 and 4 can be lled up with
optional input modules. Identical modules are allowed.
8.3.2 Input conguration
3D item in the Input menu is grayed out when no 3D module is inserted in slot 3 or 4.
How to change?
1. Press Menu to activate the menus and select Input Advanced Settings.
2. Press ENTER.
The Advanced Settings window is displayed with the actual situation lled out.
3. Use the or key to select an input
Press ENTER to open the selection menu which will be different from input type to input type.
Image 8-4
Main window
Image 8-5
Advanced input settings
R5905032 HDX SERIES 02/03/2015 77