Filter
Top Products
26Getting Ready to Print
Printer Parts and Their Functions
■ Operation Panel
• If you will not be using the printer for a long period of time, turn off the
printer; then remove the AC adapter power cord from the
power outlet.
• Always press the POWER button to turn the printer off before you
remove the AC adapter power cord from the power outlet. If the power
cord is unplugged before the printer is turned off with the POWER
button, the BJ cartridge will not return to the home position and may dry
out which could cause the BJ cartridge to become unusable.
CARTRIDGE
ERROR
POWER RESUME
POWER Button
Press to turn the
printer on and off.
Turning the
Printer On
CARTRIDGE Button
Press to move the
cartridge holder to the
center in order to switch
BJ cartridges or to
replace ink tanks and to
return the cartridge
holder to the home
position when you are
finished.
RESUME Button
Press to release the printer from an error after the
cause of the error has been removed. Pressing this
button has no effect on unrecoverable errors.
When no error exists, press once to feed a sheet of
paper. If paper is partially fed into the printer, the sheet
will be ejected.
Press and hold down until the printer beeps twice then
release to start print head cleaning.
Cleaning the Print Head
POWER Light
Tells you whether or not the printer is on.
On Lights green when the printer is standing
by and ready for normal operation.
Off Printer power is turned off.
Flashing Printer is warming up after power on, or
is receiving a print job from the printer.
ERROR Light
Lights or flashes orange when an error
occurs.
ERROR light is orange
Note