Filter
Top Products
Appendix F: Optional Input Modules
RPMSP & CSP70-D100U User’s Manual F-3
This module can display digital video input signals conforming to the DVI (Digital
Visual Interface) single-channel standard.
Features
◊ supports Digital Visual Interface (DVI) single-channel
◊ supports VESA Extended Display Identification Data (EDID)
◊ provides an active-loop-through using a DVI connector (conforming to
the DVI Specification)
The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single
SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC out to
another device (such as another projector). Inputs are 75
Ω terminated.
SDI Features
◊ accepts serial digital 4:2:2 component video (YCbCr)
◊ provides both a
SERIAL IN and a SERIAL OUT BNC connector
includes status LEDs for signal and error
◊ SMPTE 259M compatible
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be
tiled across multiple screen displays, overlapped for extra-bright displays, or
distributed to additional projectors for multiple, same-image screens.
Dual SD/HD-SDI Features
◊ Accepts and decodes up to two serial digital inputs
◊ Outputs up to two 10-bit YCbCr 4:2:2 video signals
◊ Provides input(s) to output(s) loop-through capability
◊ Supplies interchangeable inputs as part of the Picture-in Picture display
◊ SMPTE 259M compatible
DVI Inpu
t
Module '
38-804635-x
x
Serial Digital Input Module
'
38-804602-x
x
Dual SD/HD-SDI Module
'
38-804656-x
x