Filter
Top Products
Section 3: Operation
RPMSP & CSP70-D100U User’s Manual 3-15
.
Table 3.2. Abbreviations for Signal Type
Abbrev. Signal Type
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
5W Separate H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite Video
Dig Digital
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —To copy, delete or edit a channel,
highlight the desired channel in the Channel Setup menu and do one of two things:
• Press
Func
if you want to copy the selected channel or delete this or other
channels. See Copying or Deleting a Channel below.
• Press
if you want to edit channel setups (i.e., non-image related
parameters) for the selected channel. See Editing a Channel Setup, below.
TO COPY A CHANNEL, highlight the desired channel in the Channel Setup menu, then
press
Func
to go to the Channel Copy/Delete submenu. Select “Copy” and press
—a new channel will be created. It is identical to original, which still remains,
but it is identified with the next available number from 01-50. If you change your
mind and do not want to copy the current channel, press
Exi t
to cancel and return to
the previous menu. Copying channels is a quick method for creating numerous
channels, each of which can then be edited and adjusted for a variety of presentations
in the future.
Figure 3.7. Copying A Channel
TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu,
then press
Func
to activate the Channel Copy/Delete submenu. Select “Delete” and
press
—a confirmation window will appear to make sure that you really want to
delete this channel.
Copying or
'
Deletin
g
Channels