Filter
Top Products
Section 3: Operation
3-16 RPMSP & CSP70-D100U User’s Manual
Figure 3.8. Deleting a Channel
TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu
and press
Func
to go to the Channel Copy/Delete submenu. Select “Delete Unlocked
Only” and press
to delete all unlocked channels. Or select “Delete All Channels”
to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really
want to delete. Select “Cancel” if you don’t want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
From the presentation level press
Menu
to display the main menu. To display the
Channel Setup menu, press “3”, or move the highlight to the Channel Setup option
and press
. The Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and
press
. The Channel Edit menu will appear similar to the sample shown in Figure
3.9.
Figure 3.9. Channel Edit Menu (SAMPLE)
If desired, review and/or edit the following channel setups in the Channel Edit menu:
•
CHANNEL NAME: An alpha-numeric label can be defined and/or changed here.
Channel names can be up to 12 characters in length.
•
CHANNEL NUMBER: A 2-digit channel number can be changed here. NOTES: 1) If
you enter a channel number that already exists, a dialog message appears
Editin
g
a Channel Setu
p
'
CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3