Filter
Top Products
Section 3: Operation
3-22 RPMSP & CSP70-D100U User’s Manual
bars.
Figure 3.12. Blanking of a PIP Image
PLUG & DISPLAY (EDID): By default, a Plug & Play
(EDID) source outputs a signal according to the EDID
information provided by the projector. To override this
information and display in a different format (for
example, if your Plug & Play [EDID] device does not
support the projector’s resolution and/or frequency),
select the desired Plug & Play (EDID) resolution from
the list.
Any daisy-chained projectors will also display
according to the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
Use options in the Image
Settings menu to alter your
main image without affecting
its size or position. Changes
made to the Image Settings
menu are applied immediately
and are saved when you exit
the menu (press
Exi t
or
Menu
).
Options not available for the
projector model or source are
disabled and appear dim
(gray).
Contrast
(
SHORT CUT: Press
Contrast
and adjust the slidebar.)
“Contrast” increases or decreases the perceived difference between light and dark
areas of your image (0-100). For best results, keep close to 50. If contrast is set too
high, the light parts of the image lose detail and clarity. If set too low, the light areas
Ima
g
e Settin
g
s Menu '