Filter
Top Products
Section 6: Specifications
RPMSP & CSP70-D100U User’s Manual 6-3
.
Composite Video and S-Video
Signal Formats Composite (CVBS), S-Video (Y/C)
Video Standards NTSC, NTSC 4.43, PAL, PAL M,
PAL N, PAL60, SECAM
Input Levels
Composite-video 1.0Vp-p±3dB (incl. sync tip)
S-video luma (Y) 1.0Vp-p±3dB (incl. sync tip)
S-video chroma (C) 630mV nominal (burst)
DC Offset ±2V
Nominal Impedance 75 ohms
Maximum return loss (VSWR) 20dB min (1.2:1 max) @ 6 MHz
DVI Analog
Input Characteristics The same as Analog RGB except as
noted :
Formats RGB or YPbPr – video signal cannot
be routed to the decoder
Sync Types Separate H and V, direct or swapped
Bi-level – TTL levels only
Composite (XOR, OR)
Sync on green
Serrations and/or Equalization pulses
MacroVision for standard &
progressive video
Analog Sync Input Impedance 1kΩ
DVI Digital
Signal Characteristics Meets the DVI specification
Max cable length 5m
Max pixel rate 165 Mpix/s
EDID supported
HDCP supported