Filter
Top Products
Section 3: Operation
3-10 RPMSP & CSP70-D100U User’s Manual
• When using PIP images, use key to adjust the other image.
Once selected, change the settings as desired (see below). Changes take effect
immediately and are saved upon exit from all menus, or after 15 minutes.
Slidebars in menus – The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slidebar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels, degrees Kelvin, etc.), depending on the
specific option. Press
to gradually adjust the setting up or down—both the
number and the length of the bar change accordingly. Hold for continuous adjustment.
Or press
to activate a slidebar text box for specific number entry via the keypad,
then press
to save (or press
Exi t
to cancel).
“Direct” slidebars - For quick access, you access Gamma, Brightness, and Contrast
slidebars without traveling the menu system. For example, simply press
Cont
to
immediately display the same contrast slidebar accessed with the
Contrast option in
the Image Settings menu.
Use the arrow keys to adjust a direct slidebar, or press
and enter a specific
number from the keypad, then
or
or
to save (or
Exi t
to cancel). When
you are done, press
Exi t
to return to your presentation.
NOTES: 1) You can still adjust a direct slidebar as usual if the display is turned off
(see
OSD
or Menu Preferences menu) — the slidebar just won’t be visible. 2) A direct
slidebar disappears if it is not used within 5 seconds.
Checkboxes - Conditions are present if its adjacent
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press
, or highlight and use
to check and
to uncheck. If a checkbox is numbered, simply enter its number to
immediately toggle the checkbox.
Pull-down lists – To see a pull-down list of options available for a given parameter
labeled with a
▼, you can:
• Highlight it and press
(Enter)
• Or enter the menu option number.
Use
or
keys to navigate up and down within the list (the current choice is
noted with a small
'). Press to choose an option from the list, if desired.