Filter
Top Products
Section 3: Operation
RPMSP & CSP70-D100U User’s Manual 3-45
.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
Fade Time
Set how long (in seconds) it takes to gradually dissolve one image into another for a
source switch when Image Optimization is set to Best Switching. NOTE: PIP must be
disabled for Fade Time to take effect. Also, the PIP window must be closed to activate
it.
Numbers Select Main Image
Use Numbers Select Main Image to use the
numeric keys #1-8 as input keys. This remapping
of the keypad (see right) can be particularly useful
with PIP displays, providing a convenient shortcut
for changing the primary (background) image
without first having to return to the Main menu.
To use the keys in this manner all of the time,
even with single displays, select Always. For
normal keypad function, select Never (default).
Set to PIP Only to use activate number keys only
when PIP is in use.
NOTE: Numbers Select Main Image keypad
functionality works only when menus are closed.
Use the options in the Lamp menu when you want to view lamp specific, read-only
information, such as lamp status, serial number and lamp hours or to select lamp
specific operation and power modes.
LAMP MESSAGE – Enter a checkmark to enable the display of a warning message
when the lamp reaches the user-specified lamp limit. NOTE: This message will only
appear upon powering up the projector. You can press
Exit
to temporarily cancel it,
but it will appear the next time you power up or until a new lamp is installed. It is
strongly recommended this option remain enabled.
Delete the checkmark if you do not wish to receive these messages. Lamp status and
the number of lamp hours should be monitored manually.
3.8 Working with the
Lamp